Episode date: September 10, 2025Host: Steven RicksLength: ~28 minutesEpisode SummaryMeasuring might sound basic, but it’s where most beginner mistakes start. In this episode, Steven breaks down a practical, low-stress measuring system for shared shops: prioritize consistency over absolute precision, use the same measuring tools every time, and be consistent in how you mark and how you cut. We also hit Bench Notes (new shop benches, member projects, classes, and the Joinery Path), a Maker’s Moment about leveling table legs, and Ask the Joiner (the first measuring tool beginners should buy).SegmentsWhat’s On My Bench (Bench Notes)Upgrading shop workbenches with drawer modules and laminated tops (easy glue-ups, cleanup, and Joinery orange 💪).Quick jig build for 45° miters on a collectible-card box; proof you can design/build jigs fast when you focus on the task.Intro to Woodworking classes: first class filled; second added; fall sessions open on weeknights and weekends.Joinery Path launched: earn points for classes, projects, meetups; redeem for rewards up to 10% discount or a free class.Washington Tea Table project: no update (life happens!).The Craft — Measuring (Deep Dive)Core idea: Consistency beats abstract accuracy in most furniture work.Use one measuring device (ideally your own) to avoid tolerance drift between different tapes/rules—especially in a shared shop.Marking matters: be consistent about which side of the line you cut.Pencil is fine if you’re consistent; a marking knife (an affordable X-Acto works great) gives a crisp, split-the-tick reference when joints demand precision.Mechanical pencil (0.5 or 0.7 mm) helps with thin, readable lines; you can darken knife lines with pencil for visibility.Carpenter’s Triangle: always point the triangle to the outside face and place it on the top reference edge. Number parts inside the triangle. This speeds orientation, prevents “what was I doing?” moments, and makes reassembly obvious.Project example (table aprons): matching opposing parts is more important than hitting an abstract dimension. If one short apron is 10-3/8”, the other should be 10-3/8”—that’s what keeps things square and joints fitting.Maker’s MomentGetting four table legs perfectly level is a seductive time sink. Real floors aren’t perfectly flat, and wood moves with humidity.If a finished table rocks ~1/16” (even ~1/8”), consider leaving it—especially if it will live on carpet or a not-quite-flat floor. Save the heroic corrections for showroom pieces or egregious wobble.Ask the JoinerQ: “What’s the first measuring tool I should buy?” — BrianA: A 4” (or 6”) adjustable square you trust. It’s pocketable, checks squareness everywhere (machines, parts, boxes), doubles as a depth gauge (set to 3/4” for planing checks), and complements your tape. Bring your own tape in a shared shop; smaller tapes (6–12 ft) are handier and tend to stay truer in the ranges you actually use. Pair with a reliable marking pencil (see links).Tools, Brands & Resources MentionedBlue Spruce Toolworks (marking knives/layout): https://bluesprucetoolworks.com/Starrett (squares, measuring): https://www.starrett.com/iGaging (affordable squares, measuring): https://tinyurl.com/26v83a3aPica (layout/marking pencils): https://tinyurl.com/23c9xqotAmazon (X-Acto knives/blades, affordable marking knives): https://bluesprucetoolworks.com/products/classic-marking-knife-1

Ver todos los episodios