Listen "Why Won’t My Portable Generator Start?"
Episode Synopsis
Portable gas-powered generators are indispensable during power outages, camping trips, or when working in remote areas. But what happens when you go to start your generator, and nothing happens? One of the most common culprits is fuel-related issues. In this blog, we’ll explore the top fuel-related reasons your gas generator may not start and offer practical tips for troubleshooting and prevention.
1. Fuel Degradation: The #1 Starting Problem
Gasoline doesn’t last forever. Fuel can start to degrade in as little as 30 days, especially when exposed to air and temperature fluctuations. As gasoline ages, it oxidizes and forms gums and varnish that clog the carburetor’s tiny jets and passages, restricting fuel flow to the engine.
Signs of bad fuel:
Strong, sour odour
Darker colour than fresh gasoline
Sluggish or no engine turnover
Solution:
Drain old fuel from the tank and carburetor bowl.
Refill with fresh gasoline.
Add a fuel stabilizer, such as STA-BIL, to extend fuel life, especially before storage.
After adding stabilizer, run the generator for a few minutes to circulate it throughout the system.
2. Water Contamination in Fuel
Condensation in fuel tanks or contaminated storage containers can introduce water into your gasoline. Water does not burn and can prevent proper combustion or even corrode internal components.
Symptoms:
Sputtering engine
Failure to start
White smoke or steam from the exhaust
Solution:
Drain the tank completely.
Refill with fresh, dry fuel.
Consider using a fuel-water separator or ethanol treatment if you're in humid environments.
3. Ethanol-Blended Gasoline Problems
Most pump gas today contains up to 10% ethanol. While legal and widespread, ethanol has downsides in small engines:
Attracts moisture, leading to phase separation
Accelerates corrosion in metal components
Forms gummy deposits when left unused
Best practices:
Use ethanol-free gasoline if available (often sold at marinas or premium gas stations).
Always use a fuel stabilizer designed to combat ethanol-related issues.
Run your generator dry or drain the carburetor if you plan to store it for long periods.
4. Clogged or Gummed-Up Carburetor
Even if you’ve put fresh gas in the tank, residue from degraded fuel may already be clogging the carburetor. This restricts the air-fuel mixture needed for combustion.
Symptoms:
Generator starts, then stalls
No start despite a full tank and a working spark plug
Solution:
Remove the carburetor and clean it thoroughly.
Spray carburetor cleaner into jets and passageways.
Use compressed air to clear debris.
If needed, install a carb rebuild kit.
5. Fuel Valve or Fuel Line Blockage
A closed or clogged fuel valve will prevent gasoline from reaching the carburetor, even if your tank is full.
Quick checks:
Ensure the fuel valve is open.
Remove the fuel line to confirm that gasoline flows freely.
Replace fuel filters or lines if clogged or brittle.
6. The Generator Is Flooded With Fuel
Repeatedly trying to start your generator, especially with the choke on, can flood the engine. Too much fuel in the combustion chamber prevents ignition.
Solution:
Let the generator sit for 10–15 minutes to allow excess fuel to evaporate.
Avoid repeated cranking with the choke fully on.
Ensure proper choke settings when starting.
Preventive Maintenance: Your Best Defence
Routine generator maintenance can prevent most fuel-related starting issues:
Change the oil as recommended
Replace the spark plug annually or after extended use
Clean the air filter regularly
Drain the carburetor if storing for more than a month
Run the generator monthly to keep fuel flowing and prevent magnetism loss
Most portable generator starting problems are simple to fix, especially when the issue is fuel-related. Regular maintenance, fresh gasoline, and proper storage can prevent most headaches. By focusing on fuel quality and carburetor health, you can ensure your generator is ready when you need it most.
1. Fuel Degradation: The #1 Starting Problem
Gasoline doesn’t last forever. Fuel can start to degrade in as little as 30 days, especially when exposed to air and temperature fluctuations. As gasoline ages, it oxidizes and forms gums and varnish that clog the carburetor’s tiny jets and passages, restricting fuel flow to the engine.
Signs of bad fuel:
Strong, sour odour
Darker colour than fresh gasoline
Sluggish or no engine turnover
Solution:
Drain old fuel from the tank and carburetor bowl.
Refill with fresh gasoline.
Add a fuel stabilizer, such as STA-BIL, to extend fuel life, especially before storage.
After adding stabilizer, run the generator for a few minutes to circulate it throughout the system.
2. Water Contamination in Fuel
Condensation in fuel tanks or contaminated storage containers can introduce water into your gasoline. Water does not burn and can prevent proper combustion or even corrode internal components.
Symptoms:
Sputtering engine
Failure to start
White smoke or steam from the exhaust
Solution:
Drain the tank completely.
Refill with fresh, dry fuel.
Consider using a fuel-water separator or ethanol treatment if you're in humid environments.
3. Ethanol-Blended Gasoline Problems
Most pump gas today contains up to 10% ethanol. While legal and widespread, ethanol has downsides in small engines:
Attracts moisture, leading to phase separation
Accelerates corrosion in metal components
Forms gummy deposits when left unused
Best practices:
Use ethanol-free gasoline if available (often sold at marinas or premium gas stations).
Always use a fuel stabilizer designed to combat ethanol-related issues.
Run your generator dry or drain the carburetor if you plan to store it for long periods.
4. Clogged or Gummed-Up Carburetor
Even if you’ve put fresh gas in the tank, residue from degraded fuel may already be clogging the carburetor. This restricts the air-fuel mixture needed for combustion.
Symptoms:
Generator starts, then stalls
No start despite a full tank and a working spark plug
Solution:
Remove the carburetor and clean it thoroughly.
Spray carburetor cleaner into jets and passageways.
Use compressed air to clear debris.
If needed, install a carb rebuild kit.
5. Fuel Valve or Fuel Line Blockage
A closed or clogged fuel valve will prevent gasoline from reaching the carburetor, even if your tank is full.
Quick checks:
Ensure the fuel valve is open.
Remove the fuel line to confirm that gasoline flows freely.
Replace fuel filters or lines if clogged or brittle.
6. The Generator Is Flooded With Fuel
Repeatedly trying to start your generator, especially with the choke on, can flood the engine. Too much fuel in the combustion chamber prevents ignition.
Solution:
Let the generator sit for 10–15 minutes to allow excess fuel to evaporate.
Avoid repeated cranking with the choke fully on.
Ensure proper choke settings when starting.
Preventive Maintenance: Your Best Defence
Routine generator maintenance can prevent most fuel-related starting issues:
Change the oil as recommended
Replace the spark plug annually or after extended use
Clean the air filter regularly
Drain the carburetor if storing for more than a month
Run the generator monthly to keep fuel flowing and prevent magnetism loss
Most portable generator starting problems are simple to fix, especially when the issue is fuel-related. Regular maintenance, fresh gasoline, and proper storage can prevent most headaches. By focusing on fuel quality and carburetor health, you can ensure your generator is ready when you need it most.
More episodes of the podcast Aurora Generators
Perkins Engine Warranty – 6000 Hours!
17/06/2025
PTO Generators
13/06/2025
Fixing Portable Generators – No Output Power
03/06/2025
DynaGen Wiring Harnesses
02/06/2025
Introduction to DynaGen Controllers
02/06/2025
Gas vs Diesel Generators
02/06/2025
Diesel Engine Break-In
02/06/2025
Why Solar Homes Need Backup Generators
02/06/2025